vulcan
synth
see a sample
A mechanical engineer stands behind a wooden workbench among houseplants, with a laptop showing a bracket drawing, an aluminium bracket, a small motor and a caliper in front of her.

your part, pass or fail, in 60 seconds

check the bracket ChatGPT sized or the one you drew, and get a verdict with every formula showing.

a verdict, not an opinion

a pass/fail report on the part you hand over, including one an AI suggested.

every number comes from deterministic, repeatable physics: the same part and load give the same answer, every run.

  • a part file
  • a pasted design
  • load + environment
  • stress
  • deflection
  • safety factor
  • fastener sizing
  • shaft sizing
  • thermal + heat path
six checks in, one pass / fail report out
Three engineers in yellow, light blue and red coveralls stand side by side against a grey wall, each holding a part: a bracket, a finned heat sink and a shaft with a bearing.

from part to verdict

  1. 1upload the part or paste the design.
  2. 2say the load and the environment in plain words.
  3. 3read the pass/fail report, formulas included.

an AI-suggested part and a hand-drawn one get the same treatment: a pass/fail verdict, and every number traced to a formula you can read.

a sample of what comes back

two sample reports for one bracket: one passes, one fails, and each number shows the formula behind it.

motor-mount bracket

structural check, 6061-T6

sample
  • bending stress

    σ = 6FL / bh²

    6·800·60 / (20·12²)

    100 MPa

    max 276

    pass
  • safety factor

    SF = σy / σ

    276 / 100

    2.76

    min 2.0

    pass
  • tip deflection

    δ = FL³ / 3EI

    800·60³ / (3·68900·2880)

    0.29 mm

    max 0.50

    pass
  • bolt shear, 2 × M4 8.8

    τ = F / (n·As)

    800 / (2·8.78)

    45.6 MPa

    max 384

    pass

inputs: F 800 N at L 60 mm, section b 20 × h 12 mm, E 68.9 GPa, σy 276 MPa

same bracket

thermal check, still air

sample
  • steady-state rise

    ΔT = Q / hA

    12 / (10·0.012)

    100 K

    max 80

    fail

inputs: Q 12 W, h 10 W/m²K, A 0.012 m², ambient 25 °C, surface 125 °C

pricing, billed monthly

free

one check

no signup. an email is asked for only if you want to save the report.

lab core

$299/month

500 thermal and structural check runs a month, saved reports and API access.